Elmer’s harvest and field equipment, sold and serviced in Vulcan.
Prairie-built grain carts and other Elmer’s equipment, backed by a Southern Alberta dealer with parts, service and warranty support on site.
Elmer’s Manufacturing is a farm equipment maker in Altona, Manitoba. It grew from a small farm business in 1978 and now designs equipment for operations of any size, including Haulmaster grain carts, the Super 7 harrow, the Wolverine ditcher and the Ravage bale processor. Elmer’s describes its machines as designed for rugged conditions and backed by world-class support.
WHY WE CARRY ELMER’S
• Built on the Prairies. Elmer’s designs and builds in Altona, Manitoba, for harvest and field conditions Southern Alberta growers already know.
• Carts meant to keep combines moving. Official Haulmaster material highlights a direct-drive gearbox, dual-auger design and in-cab CONNECT technology for live weights, GPS and load tracking.
• High-capacity residue tools when you need them. Elmer’s Super 7 line uses a 7-bar design and in-cab Dynamic Ground Pressure. Ask the shop about current harrow availability; a Super 7 is not in the public inventory as of this writing.
• Support after the sale. R.A. West has more than 20 years of experience as a Southern Alberta equipment dealer, with parts, service and warranty help on the equipment we sell.
EQUIPMENT WE HAVE IN INVENTORY
Inventory changes. Confirm availability before treating a unit as in stock.
Looking for another Elmer’s model, including a Super 7 harrow? Contact us and we will check availability.
FOR SOUTHERN ALBERTA FARMS
We are based at 285 Service Road in Vulcan. Harvest windows here can be short, and a cart that stays on all four wheels and unloads without a belt-and-chain drive is the kind of iron we like to stand behind. Come look at the Haulmaster, then count on our parts and service team to keep it working.
See the Haulmaster, or ask us about other Elmer’s equipment.
Haulmaster grain cart
The Haulmaster line is built in Altona, Manitoba, in sizes from 1,100 to 3,000 bushels. A direct-drive gearbox and dual-auger design are meant to unload cleanly and send the cart back to the harvester without a belt-and-chain drive. R.A. West currently has a Haulmaster 2000 grain cart in inventory; other sizes can be quoted.
Features
PowerMaster direct-drive gearbox, so the cart does not rely on belts or chains
Dual-auger design with a right-hand unloading auger, so the operator unloads on the same side as the in-cab controls
Haulmaster CONNECT brings live weights, GPS and load tracking to a supplied tablet, with support for more than one tablet (cart, truck or combine)
Optional Haulmaster PRO adds a joystick in place of hydraulic levers, double-tap fold and unfold, and auto gate close at 3 mph
Undercarriage options include single tires, row-crop tandems, steerable in-line tandems (SteerLock is available with CONNECT) and tracks, including TerraWave tracks on the 2500 and 3000
A 5-point scale is standard on the 1700 and larger, including the 2000
Key specs
Line sizes: 1100, 1300N, 1300, 1500, 1700, 2000, 2300, 2500 and 3000 (the model number is the bushel capacity)
Haulmaster 2000 capacity: 2,000 bushels; width 14'; overall length 38'; tank length 28' 3"
Loading-side height 11' 4"; transport height 12' 9"
Auger max height 16' 4"; max reach 9' 8"; unloading auger 24"; horizontal auger 22"
Minimum tractor power: 400 hp; hydraulic remotes: 4; 5-point scale and CAT 4 hitch standard
Empty weight: 33,600 lb (steerable in-line tandem), 34,400 lb (large tracks)
The 2000 in our yard has steerable in-line tandems and SteerLock, a PowerMaster direct-drive gearbox, a right-hand unloading auger, Haulmaster CONNECT with tablet, a 5-point scale and a CAT 4 hitch. Inventory changes, so please confirm availability.
Super 7 harrow
The Super 7 is Elmer’s residue and seedbed harrow, built to chop straw, spread residue and level the field for granular fertilizer or seed. The current design uses a redesigned frame, sections and steerable wheels, with in-cab Dynamic Ground Pressure and 26 inches of independent vertical travel on each section so down pressure stays consistent over changing terrain. It is offered in 70', 90', 110' and 130' widths. Contact R.A. West for current Super 7 availability; a Super 7 is not in the public inventory as of this writing.
Features
Original 7-bar design, which Elmer’s says delivers up to 40% more harrow action per pass than a 5-bar unit, with ½" hardened tines
Dynamic Ground Pressure is set electronically from the cab and actuated hydraulically, with 26 inches of independent vertical motion on each section
MAXLIFE tines use weld-embedded tungsten carbide so the ½" × 22" tines wear longer in tough residue
Completely greaseless, with solid pull arms and a SecureLock system that uses spring-applied latches and cylinder-mounted interlocks so sections stay latched if hydraulic pressure is lost
Hydraulically controlled pivoting wheels take the place of separate transport and field wheels, which Elmer’s says lets the harrow use larger tires and unfold in less space and time
Optional S7 PRO adds fold and unfold automation, up to 50 setting presets, software-controlled steerable wheels, and tablet or ISOBUS control, plus a hydraulic override if the electronics fail
Key specs
Widths and sections: 70' (7 sections, 294 tines), 90' (9, 378), 110' (11, 462), 130' (13, 546)
Transport width 15' on all widths; transport height 12' 10" (70', 90') or 13' 8" (110', 130')
Transport length: 54' 7" (70'), 64' 7" (90'), 78' 6" (110'), 88' 6" (130')
Approximate weight: 17,500 lb (70'), 19,500 lb (90'), 29,500 lb (110'), 32,600 lb (130')
Bar spacing 14"; tine spacing 1 7/16"; tines ½" diameter × 22" long; tine angle adjustment 90° to 40°
Recommended power: 5–7+ hp per foot; toolbar 10" × 10" (70', 90') or 12" × 12" (110', 130')
Hydraulic outlets required: 4 (1 with PRO); case drain required; minimum 2,800 PSI; recommended flow 35 GPM
Recommended starting speed: 12 mph (20 km/h)
Ravage bale processor
The Ravage is Elmer’s tractor-powered bale processor for bedding and bunking. It holds up to three 4×4×8 square bales or two round bales, with a full-length live floor so the operator can control how fast the bale feeds, and a directional chute for spreading or placing material into a bunk. Direct-drive gearboxes take the place of belts and shear pins. Contact R.A. West for current Ravage availability; a Ravage is not in the public inventory as of this writing.
Features
Holds up to three square bales (4×4×8) or two round bales, in a range of bale types and sizes
Full-length live floor for control of processing speed, with a spring-loaded discharge door to eject an unneeded or frozen bale
Direct-drive gearboxes, with no belts or shear pins, and an auto torque-limiting clutch to protect the driveline
Adjustable upper beater, one-piece forged flails, and adjustable or removable aggression bars to match different bales
Directional chute for spreading or bunking, with even spread up to 50 feet
Optional 3 hydraulic remotes (with an electric toggle between the loading forks and the chute) or 4 remotes (chute, forks, live floor and upper beater on separate controls)
Key specs
Height (forks down): 8' 3" (99")
Length: 19' 5" (233"); 15' 7" (186.5") with the forks removed
Width: 11' (131.25")
Weight: 7,250 lb; tongue weight: 3,100 lb
Tractor power: 125–175 hp, with a standard 1,000 rpm PTO
Spread distance: up to 50'
Tires: 550/45/22.5 high-flotation
Hydraulic controls: optional 3 or 4 remotes
Chop length varies, minimum 1"